Your shopping cart is empty!

FlightLine RC F7F-3 Tigercat 1600mm PNP 0 reviews

FlightLine RC F7F-3 Tigercat 1600mm PNP
FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP FlightLine RC F7F-3 Tigercat 1600mm PNP
Brand: FlightLine RC   / Product Code: FLW302P
Availability: Out Of Stock

Reward Points: 348

Earn points and buy for free

Wish List Compare Write a review

FlightLine RC F7F-3 Tigercat 1600mm PNP

The Grumman F7F Tigercat is a twin piston engine aircraft developed during World War II. Originally envisioned as a carrier-based naval fighter, the Tigercat underwent several iterations and was later optimized for a variety of roles. Although World War II ended before it became fully combat operational, many variants of the Tigercat went on to serve in the Korean War in capacities including as a night fighter, ground attack platform, and a dependable reconnaissance platform. Today, the Tigercat’s renown as one of the highest performing piston driven aircraft in aviation history continues in peacetime at air races, air shows, and commemorative events celebrating the men and women who served with these aircraft. The FlightLine RC F7F-3 Tigercat exhibits fantastic stability, is very easy to control at a wide speed range, and has a predictable stall with easy recovery. We designed this aircraft to be a superb balance between top speed, vertical performance, flight duration, convenient transport, sport scale realism, and overall scale presentation. This is our seventh FlightLine RC warbird and it continues to innovate and raise the value bar for its owners.

Meticulously designed to incorporate EPO foam, wood, plastic, and carbon reinforcements, our design is easy to assemble and maintain, and delivers the strength and power to satisfy any RC airplane pilot. The main wing halves, horizontal stabilizer, and two engine nacelles each install with four screws. A new pliable ribbon wiring harness simplifies each wing connection to one instead of five, so the wing can be attached in less than one minute. The antenna and gun barrels are also designed to easily slide out to prevent damage during transport. A plastic nose cone, cowls, and doors are designed for longevity. 

The FlightLine RC F7F-3 Tigercat arrives with dependable electronics pre-installed, and every servo in the aircraft is a Digital Metal Gear servo. The aircraft uses our DayBright 3W LEDs for visibility. Static wingtip lights remain on, and the single landing light turns on only when the landing gear is down, for ultimate realism like the full scale aircraft. As with other FlightLine RC warbirds, the F7F-3 Tigercat arrives expertly painted and ready to customize. Three tone painted engine detail sets the stage for a modeling detailer’s delight! Four sets of adhesive vinyl decals are also included in the box. Choose from these decals or recreate your own historic livery as you wish!

The F7F-3’s generous main wing area allows a short takeoff distance of 15-20 meters, and its 70mm diameter nose wheel and 80mm diameter main wheels and thick steel struts are excellent for operating on typical grass airfields. An optional aluminum compression strut upgrade is available for atypically rougher grass conditions. The Tigercat’s tricycle landing gear reduces the risk of tipping forward after landing, and makes taxing on the ground very stable. Four flaps slow the aircraft for controlled power on landings at low speed. We recommend a Down Elevator Mix to correspond with flap deployment.
For thrilling efficient power, the aircraft features a pair of 3748-600kv brushless motors, 3-blade 12x7 propellers (Standard and Reverse rotation), and two 60A ESCs. The Tigercat uses the same propeller blades as the FlightLine RC P-38, Sea Fury, F8F-1 Bearcat, and Spitfire Mk. IX. The model’s top speed is 125kph/78mph, and comfortable flight duration ranges between 6 and 7 minutes on a pair of 4s 3000mAh lipo batteries.

- Scale profile, accurate wing dihedral, and precisely modeled overall aircraft proportions
- Removable wings for easy transport
- Scale three blade propeller achieves 78 mph and scale plus thrust
- Four different decal sets included inside the box for you to choose from
- Day-bright LEDs and accurately actuating landing gear light
- Large cabin space for easy placement of the batteries and radio equipment
- Durable electric retractable landing gear with metal trunnions and 4mm steel wire struts
- Tall foam rubber wheels for optimal handling on paved surfaces and short grass fields

- 6 Channel Radio
- 6 Channel Receiver
- TWO 4 Cell 14.8V 3000-3300mAh LiPo batteries with XT60 Connectors
- 4 Cell Compatible Battery Charger


Experience level Intermediate
Wingspan 1600mm / 63in
Overall length 1400mm
Flying weight 3200g
Power system 3748-600Kv Brushless Outrunner Motor
Speed control Two 60A Brushless ESCs with XT60 connectors
Propeller 12x7 3 Blade Propeller / 12x8 2 Blade Propeller High Performance Version
Radio 6 Channel
Servos 9g Digital Metal Gear Standard with 550mm lead: Left Aileron, Right Aileron 9g Digital Metal Gear Standard with 400mm lead: Right Outboard Flap 9g Digital Metal Gear Reverse with 400mm lead: Left Outboard Flap 9g Digital Metal Gear Reverse with 100mm lead: Left Inboard Flap 9g Digital Metal Gear Standard with 100mm lead: Right Inboard Flap 9g Digital Metal Gear Reverse with 750mm lead: Rudder 17g Digital Metal Gear Reverse with 550mm lead: Nose Steering 17g Digital Metal Gear Standard with 800mm lead: Elevator
Battery Two 4 Cell 14.8v 3000mAh batteries with XT60 connector
CG (Centre of Gravity) 65-73mm from leading edge
Recommended environment Outdoor
Assembly time (approx.) 2-3 Hours
Material EPO foam

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: