The Freewing Pandora is one of the finest beginner and intermediate planes on the market. The Pandora ships as a high wing trainer. You can change the covering to the included low wing cover and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. as well there are two sets of wheels. There is a set of tricycle landing gear, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing.
You have 4 combinations and can make 4 different planes. The Pandora does not get knocked around by the wind as much as a smaller plane. This is one of the best performing, best built, best values in RC planes.
Features:
- High wing and low wing configuration included in one plane
- Tricycle landing gear and tail dragger landing gear included
- Included BIG wheels for tall grass takeoff and landings
- Molded wing pocket for optional flap servos - hardware and push rods are included
- Durable EPO foam construction
- Nylon hinges on all control surfaces
- Brushless motor, ESC, and 4 micro servos installed
Requires:
- 4 Channel Radio
- 4 Channel Receiver
- 3 Cell 11.1V 2200 mAh Lipo Battery with XT60 Connector
- 3 Cell Compatible Battery Charger
Experience level | Beginner+ |
Wingspan | 1400mm/55.1in |
Overall length | 1180mm/46.5in |
Flying weight | 1500g |
Speed control | 30A, Internal BEC, XT60 connector |
Propeller | 11x6 3 blade prop |
Radio | 4 Channel |
Servos | 9g standard with 300mm lead : elevator, rudder, left flap 9g reverse with 300mm lead : right flap 9g standard with 550mm lead : left aileron, right aileron |
Battery | Li-Po battery 11.1V 2200mAh 25C 3 cell with XT60 Connector |
Recommended environment | Outdoor |
Assembly time (approx.) | 1 Hour |
Material | EPO Foam |