Your shopping cart is empty!

FMS F-16 EDF Jet 776mm PNP 1 reviews

FMS F-16 EDF Jet 776mm PNP
FMS F-16 EDF Jet 776mm PNP FMS F-16 EDF Jet 776mm PNP FMS F-16 EDF Jet 776mm PNP FMS F-16 EDF Jet 776mm PNP
Brand: FMS Models   / Product Code: FMS005
Availability: Out Of Stock

Reward Points: 194

Earn points and buy for free

Wish List Compare Write a review

FMS F-16 EDF Jet 776mm PNP

The General Dynamics (now Lockheed Martin) F-16 Fighting Falcon is a multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successful all-weather multirole aircraft. Over 4,500 aircraft have been built since production was approved in 1976. THE FMS molded foam construction shows lots of detail and a very smooth painted matte finish. Total assembly time is about one hour due to the low parts count and beautiful fit. The 70mm fan unit includes an OUTRUNNER motor that provides lots of thrust for quick takeoffs with a strong climb out. Access to the 70mm fan unit and 70A ESC is also very simple: just remove 2 screws and the entire middle section of the main duct can be removed. This is great for those who want to hop this one up or simply need easy access for maintenance and blade balancing.

The ducting is very clean giving the F-16 impressive speed, but in a model large enough for easy flight orientation. Landings are quite slow due to the large lifting body shape of the F-16. Bring it in with the nose high and it will slow to a walk.

4 channel transmitter and receiver
14.8V 2600mAh 4S 25C LiPo battery

Download the FMS F16 EDF jet manual


Experience level Intermediate
Wingspan 780mm / 27.5in
Wing area 18.5dm2
Overall length 1230mm / 43.4in
Flying weight 1000g
Power system 2845-KV3000 Powerful out runner brushless motor
Speed control 70A with integrated 5A BEC
Radio 4 Channel
Servos 9g Servo x 5
Battery Li-Po battery 14.8V 2600mAh 4S 25C
CG (Centre of Gravity) 78mm from wing leading edge
Recommended environment Outdoor
Assembly time (approx.) 60 minutes
Material Durable EPS

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: