Earn points and buy for free
Flying the Funky Cub 1800mm is simply a joy to all levels of flyers as it is easy to fly and quick to assemble. It possesses trainer stability attributes and gives room for lots of aerobatic performances. This model was designed with the inspiration of the sports trainer flyer and is without doubt, the one to fly when looking for an easy and peaceful flying.
Although the Funky Cub 1800mm is made of balsa and plywood, it is a light airplane and it is stronger than the average ARFT airplanes. Operating flaps widen the already broad flight envelope and Pushrods are pre-made to the correct lengths. The motor mount has been fitted and the hinges are pre-installed and pinned for security. This plane is suitable for nitro engines .60 to .75 or to gasoline/petrol 10CC to 15CC.
You can also enjoy flying this model on calm water or lake by ordering the floats.
|Experience level||Experienced and beginner pilots|
|Wingspan||180 cm / 70.9 in|
|Wing area||51.2 sq.dm / 793.9 sq.in|
|Overall length||128 cm / 50.4 in|
|Flying weight||3.7 kg / 8.2 lb|
|Power system||Nitro 2-stroke .61-.75 or 4-stroke .82-.91 or gasoline 10-15 cc|
|CG (Centre of Gravity)||88 mm from the leading edge of the wing|
|Assembly time (approx.)||10 to 15 hours|