Your shopping cart is empty!

FlightLine RC B-24 Liberator Olive Drab 2000mm PNP 1 reviews

FlightLine RC B-24 Liberator Olive Drab 2000mm PNP
FlightLine RC B-24 Liberator Olive Drab 2000mm PNP FlightLine RC B-24 Liberator Olive Drab 2000mm PNP FlightLine RC B-24 Liberator Olive Drab 2000mm PNP FlightLine RC B-24 Liberator Olive Drab 2000mm PNP
Brand: FlightLine RC   / Product Code: FLW401P
Availability: Out Of Stock
Weight:6.3kg
US$424.00
Ex Tax: US$424.00
Qty:
Wish List Compare Write a review
 

FlightLine RC B-24 Liberator Olive Drab 2000mm PNP

Features:

- Includes two magnetic nose cones to alternate between -D and -J variants
- Panning nose turret and upper turret with pre-installed tiller arms
- Two paint schemes to choose between (Green/Gray or All Silver)
- Two decal sets included inside each paint scheme’s box
- Grass Capable Landing Gear with 70mm Tall Nose and 85mm Tall Main Wheels
- 12 Screw Primary Assembly
- Removable Wings with Convenient Ribbon Wire Harness
- Split flaps
- Vast Customization Options for FPV cameras, Moving Turrets, Doors, 3D Printed Detail upgrades, etc
- Modeled with Input from Collings Foundation, Operator of Last Flying B-24J, “Witchcraft”

Requires:

- 6 Channel Radio
- 6 Channel Receiver
- Two 4-cell 14.8V 3000mAh LiPo batteries
- 4-cell compatible battery charger

Specification

Experience level Intermediate
Wingspan 2000mm / 78.74in
Overall length 1230mm
Flying weight 2910g
Power system Four 3530-860kv Brushless Outrunner Motors
Speed control Four 30A ESC, 5A BEC, Two XT60 Connectors
Propeller 12x7 3 Blade Propeller / 12x8 2 Blade Propeller High Performance Version
Radio 6 Channel
Servos 9g standard digital metal gear with 550mm lead : nose gear steering 9g standard digital metal gear with 750mm lead : left aileron, right aileron, left elevator, right elevator 9g standard digital metal gear with 300mm lead : left flap, right flap 9g standard digital metal gear with 750mm lead plus 300mm lead : left rudder, right rudder
Battery Two 4s 14.8V 3000mAh-4000mAh LiPos with XT60 connector
Recommended environment Outdoor
Assembly time (approx.) 3-4 Hours
Material EPO foam

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: