Your shopping cart is empty!

Dualsky Xmotor 5050EA 480KV 0 reviews

Dualsky Xmotor 5050EA 480KV
Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV Dualsky Xmotor 5050EA 480KV
Brand: Dualsky   / Product Code: XM5050-B
Availability: In Stock
Net weight:360g
US$179.00

Reward Points: 179

Earn points and buy for free

Qty:
Wish List Compare Write a review
 

Dualsky Xmotor 5050EA 480KV

Prolong the lifetime of rotors in the environment of highpower and high torque with the Dualsky EA series brushless outrunner motors, with improved running efficiency in the middle RPM range. These high quality yet low priced motors are suitable for all aircraft pilots.

features:
- Improved front cover, better heat dissipation
- Rotor with more beautiful star design
- Increase the intensity of rotor and shell, reduce vibration and bear more load
- Switch to curved magnets with higher grade
- Use high efficiency silicon steel
- Reduce the air gap of the stator and rotor, increase efficiency
- Use thicker enameled wire which is resistant to high temperature, improve insulation and impact resistance
- Compared with CA, EA power is increased by 10-20% and efficiency increased by 3-5%
- More options for KV value, suitable for practical use
- Add XM2838EA XM4255EA to EA series, which CA series have not
- Motor mounting holes and shaft diameter compatible with CA series
- Accessories compatible with the CA series(except new added models)
- 8mm propeller mount with thinner threads, propeller not easy to loose

Specification

Type Brushless Outrunner
RPM / Volt 480 Kv
Maximum power 1242 W
Cells 5s - 6s LiPo
Resistance 0.025 ohm
Burst current 56 A
ESC 60 A
Shaft diameter (A) 6 mm
Recommended propeller 5S 15x8 / 6S 14x7
Net weight 281 g

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: